PY6106C普通磨料堆積密度測定儀
PY6106CCommon abrasive bulk density tester
一． 參照標準standard：
GB-T3603-83普通磨料堆積密度測定方法要求制作，適用于剛玉及碳化硅8~240號粒度磨料堆積密度的測定
According to GB-T3603-83, The bulk density measuring method of ordinary abrasive materials. It is suitable for the bulk density measurement of the grinding materials of Corundum and silicon carbidee which granularity between 8 and 240
二．參數資料Parameters
漏斗材質：黃銅或不銹鋼；錐部高度：82毫米；錐部角度：60~63°；
Funnel material: brass or stainless steel, cone height: 82 mm,
cone angle: 60~63°.
漏斗頸內徑：12.7±0.05毫米；漏斗頸長度：12.70.05毫米。
Funnel neck inner diameter：12.7±0.05 mm, funnel neck length: 12.70.05mm.
漏斗鎖閉裝置是一個直徑為35毫米的橡膠球。用兩根彈簧固定在漏斗頸的下端。漏斗頸下端至測量筒口的距離為115±2毫米。
The funnel locking device is a rubber ball with a diameter of 35 mm
5.測量筒材質：黃銅；內徑：39±0.1毫米； 內深度：83.7±0.1毫米；容積：約100厘米3. Measuring cylinder material: brass, inner diameter: 39±0.1mm, internal depth: 83.7±0.1mm,volume:100 cm3.
6.刮料板材質：黃銅Scraper material: brass
7.選購天平：稱重500g，0.1克
8.配置：架臺：1套 ；漏 斗： 1只；量杯; 黃銅材質（Φ31mm、25ml）1只;;溢料盤不銹鋼1只;毛 刷1只; 說明書；保修卡；合格證。
Equipment: Stand: 1 sets, funnel: 1pcs, measuring cup: brass (Φ31mm,25ml)1pcs,
overflow tray stainless steel 1pcs, brush 1pcs,manual,warranty card, certificate.
