當前位置：深圳市錦辰科技有限公司>>光纖收發器>>標準百兆光纖收發器>>FT-1205A

FT-1205A

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價收藏產品查看聯系電話

聯系方式：張薇薇查看聯系方式

更新時間：2022-03-14 17:06:00瀏覽次數：307次

聯系我時，請告知來自智慧城市網

產品分類 品牌分類

  光纖收發器

其他網絡轉換器

視頻光端機

可網管型光纖收發器機箱

非網管型光纖收發器機箱

串口轉以太網轉換器

標準百兆光纖收發器

標準千兆光纖收發器

Web管理/智能型百兆光纖收發器

Web管理/智能型千兆光纖收發器

全部產品列表

暫無信息

深圳市錦辰科技有限公司

經營模式：其他

商鋪產品：408條

所在地區：

聯系人：張薇薇

詢價 給他留言

產品簡介

PLANETFT-1205Aisa3-portRedundantMediaConverterwhichsupportsconversionbetween10/100Base-TXand100Base-FXnetwork

詳細介紹

PLANET FT-1205A is a 3-port Redundant Media Converter which supports conversion between 10 / 100Base-TX and 100Base-FX network. The difference with the other one-port channel media converter is the Redundant Media Converter. It is designed for critical networks that require fibers or copper links to automatically recover less than 10ms, such as ISPs, telecoms, hospitals, banks and enterprises.

Via the built-in DIP switches, the converter can be configured as 3-port Ethernet switch or 2-port redundant media converter. With the 3-port switch mode, it can operate Store-and-Forward mechanism with high performance, and it can also prevent packet loss via IEEE 802.3x flow control (full-duplex) and back pressure (half-duplex).

With the 2-port redundant mode, it provides less than 10ms redundancy of link for highly critical Ethernet applications. The redundant mode supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair.

The SFP slot supports single-mode, multi-mode and WDM small-form factory type transceiver modules for various applications. The FT-1205A is with high reliability and flexibility to extend the distance up to 2km, 20km or longer. It depends on the 100Base-FX SFP transceiver modules. The Ethernet signal that allows two types of segments to connect easily, efficiently and inexpensively.

The converters can be used as a stand-alone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700, MC-1500, MC-1500R and MC-1500R48. As to the other PLANET media converters (FT series), they're hot swappable in MC chassis.

Fault Tolerant Redundant Link for Critical Network Applications
The FT-1205A is designed for optical fiber networks that require rapid link redundancy. With the auto-recover less than 10ms, the redundant media converter provides the rapid response time required for critical applications.

? Standard
??Complies with IEEE 802.3, IEEE 802.3u 10 / 100Base-TX and 100Base-FX
??IEEE 802.3x full-duplex flow-control, back-pressure in Half-duplex eliminate packet loss
??TS-1000 / OAM function built-in, the device can be remotely monitored with port link status
? Interface
??Dual 100Base-FX SFP fiber optic
??One 10 / 100Base-TX copper
??Auto-negotiation for 100Base-TX half-duplex or 100Base-T full-duplex
??Supports auto MDI / MDI-X function
??Supports maximum frame size up to 2046Kbytes
? Redundancy
??Link status auto-detect and redundant on dual ports with the same connector type
??Only primary port is active at a time, the backup port is blocked
??While primary port link fail occurrences, the traffic will swap to backup port automatically
??Once the primary port status is back to linkup, the traffic will swap from backup port to primary port
??Hardware redundant swaps less than 10 ms
? Mechanical
??External 5V / 2A DC power supply
??LED indicators for easy network diagnostic
??DIP switch for 3-port operation with Fast Ethernet switch mode or redundant mode
??DIP switch for LBR (Loop Back Reply) on / off selection
??Compact size work with PLANET MC family Media Chassis, MC-700 / MC-1500 / MC-1500R / MC-1500R48

電口	1 x 10 / 100Base-TX port
光纖端口	2 x 100Base-FX port
光纖接口	SFP
光學波長	Varying on SFP module
發射功率（dBm）	Varying on SFP module
Launch Power (dBm)-Min.	Varying on SFP module
Receive Sensitivity	Varying on SFP module
Maximum Input Power	Varying on SFP module
Redundant Link	Port 1 (Primary) Port 2 (Backup)
Cable-Twisted-pair	10Base-T : 2-Pair UTP Cat. 3, 4, 5, up to 100 m 100Base-TX : 2-Pair UTP Cat. 5, 5e up to 100 m
Cable-Fiber-Optic Cable	? 50 / 125?m or 62.5 / 125?m multi-mode fiber cable, up to 2km. ? 9 / 125?m single-mode cable, providing a long distance of 20 / 40 / 60km or longer (varying on SFP module)
Speed-Twisted-pair	10 / 20Mbps for half / full-duplex 100 / 200Mbps for half / full-duplex
Speed-Fiber-optic	200Mbps for full-duplex
LED Indicators	System: One Power LED TP Port: One Speed; One LNK / ACT Fiber Port: One Link / Act
DIP Switches	DIP 1: On 3-port switch mode; Off 2-port redundant DIP 2: On loop back reply enable; off loop back reply disable
Standards	IEEE 802.3, 10Base-T IEEE 802.3u, 100Base-TX, 100Base-FX IEEE 802.3x Flow Control
Power Consumption	6.7 watts (maximum)
Power Input	5V / 2A
Dimensions (W x D x H)	97 x 69 x 25 mm
Operating Environment	Operating temperature: 0~50 degrees C Humidity: 10~90% non-condensing
Storage Environment	Storage temperature: -25~70 degrees C Humidity: 10~90% non-condensing