| General specifications |
|---|
| Sensing range | 0 ... 4000 mm , distance emitter-receiver 500 mm ... 4000 mm |
| | Through-beam mode | Single path ultrasonic switch |
| Reference target | receiver |
| Transducer frequency | 85 kHz |
| Indicators/operating means |
|---|
| LED green | alignment aid
OFF: no ultrasonic signal
flashing: uncertain area
ON: positive reception |
| LED yellow | switching state |
| Electrical specifications |
|---|
| Operating voltage | 18 ... 30 V DC , ripple 10 %SS |
| No-load supply current | 35 mA emitter
25 mA receiver |
| Output |
|---|
| Output type | 2 switch outputs PNP, normally open/closed (complementary) |
| Rated operating current | 200 mA |
| Voltage drop | ≤ 2.5 V |
| Switch-on delay | 100 ... 3000 ms |
| Switching frequency | ≤ 15 Hz |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
|---|
| Ambient temperature | 0 ... 60 °C (32 ... 140 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
|---|
| Connection type | Connector M12 x 1 , 5-pin |
| Degree of protection | IP65 |
| Material | |
| | Housing | nickel plated brass; plastic components: PBT |
| Mass | 160 g each sensor |
