當前位置：天津市電纜總廠第一分廠>>西門子>>西門子S7-400可編程控制器CPU412-1

西門子S7-400可編程控制器CPU412-1

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號6ES7 400-0HR00-4AB0

品牌

廠商性質經銷商

所在地上海

在線詢價收藏產品查看聯系電話

聯系方式：陳明銀查看聯系方式

更新時間：2017-11-06 12:52:36瀏覽次數：298次

聯系我時，請告知來自智慧城市網

產品分類 品牌分類

  西門子

全部產品列表

暫無信息

天津市電纜總廠第一分廠

經營模式：經銷商

商鋪產品：500條

所在地區：上海上海

聯系人：陳明銀（銷售【經理】）

詢價 給他留言

產品簡介

西門子S7-400可編程控制器CPU412-1
上海邑斯公司優勢產品; PLC 、觸摸屏、變頻器、電纜及通訊卡、數控系統、網絡接頭、伺服驅動、凡在公司采購西門子產品，均可質保一年，假一罰十

詳細介紹

西門子S7-400可編程控制器CPU412-1 西門子S7-400可編程控制器CPU412-1

SIEMENS 上海邑斯自動化科技有限公司

我公司經營西門子*現貨PLC；S7-200S7-300 S7-400 S7-1200 觸摸屏，變頻 器，6FC，6SNS120 V10 V60 V80伺服數控備件：*電機（1LA7、1LG4、1LA9、1LE1），國產電機（1LG0，1LE0）大型電機（1LA8，1LA4，1PQ8）伺服電機（1PH，1PM，1FT，1FK，1FS）西門子保內*產品‘質保一年。一年內因產品質量問題免費更換新產品；不收取任何費。咨詢。

：陳明銀

24小時：同步 上海邑斯竭誠為您服務;

工作：

：@ .com

；

可編程控制器

上海邑斯公司優勢產品; PLC 、觸摸屏、變頻器、電纜及通訊卡、數控系統、網絡接頭、伺服驅動、凡在公司采購西門子產品，均可質保一年，假一罰十

以滿足客戶的需求為宗旨 , 以誠為本 , 精益求精

概述

滿足中等規模要求中有較高要求的CPU
可應用在對程序和處理速度又額外要求的應用中．
CPU 414-3 PN/DP 中集成了 PROFINET 功能

應用

CPU 414-2, CPU 414-3 和 CPU 414-3 PN/DP 為中等性能要求中的高需求而設計．他們可以滿足對程序容量和處理速度有較高要求的應用．

CPU 414-2 和 CPU 414-3　中內置 PROFIBUS DP 口，可以作為主站或從站直接連接到 PROFIBUS DP 現場總線。

使用 IF 964-DP 接口模板，還可將其他 DP 主站系統連接到 CPU 414-3 和 CPU 414-3 PN/DP 上。

在使用 PROFINET-ASIC ERTEC 400 時，CPU 414-3 PN/DP 具有/換機功能。它提供了可從外部接觸到的兩個 PROFINET 端口。除分層網絡拓撲結構之外，還可以在新型 S7-400 控制器中創建總線形結構。

注意:
只有 6ES7 964-2AA04-0AB0 接口子模塊才能使用。

設計

CPU 裝配有：

功能強大的處理器：
CPU 執行每條二進制指令時間僅為 0.045µs 。
CPU 414-2: 1 MB RAM (其中，程序和數據各使用 512 KB);
CPU 414-3: 2.8 MB RAM (其中，程序和數據各使用 1.4 MB);
CPU 414-3 PN/DP: 2.8 MB RAM (其中，程序和數據各使用 1.4 MB);
快速 RAM 用于執行部分用戶程序
靈活擴展：
zui高 131072 個數字量以及 81932 個模擬量輸入/輸出。
MPI多點接口：
通過 MPI，可將zui多 32 個站連成簡單網絡，數據傳輸速率高達 12 Mbit/s。CPU 可與通訊總線（C 總線）和 MPI 的站之間建立zui多 32 個連接。
模式選擇開關：
波動開關設計。
診斷緩沖區：
zui后的故障和中斷事件保存在一個環形緩沖器中，用于進行診斷。可以對輸入數目進行設定。
實時時鐘：
日期和時間附加在 CPU 的診斷消息后面
存儲卡:
用于擴展內置的裝載存儲器。存儲在裝載存儲器中的信息包括S7-400參數數據以及程序，因此需要2倍的存儲空間。其結果是：
- 內置的裝載存儲器不能滿足大程序量的要求，因此需要存儲卡。可使用 RAM 和 FEPROM 卡。
PROFIBUS-DP 接口和組合的MPI/DP 接口：
通過 PROFIBUS DP 主站接口，可以實現分布式自動化組態，從而提高了速度，便于使用。對用戶來說,分布式I/O單元可作為一個集中式單元來處理(相同的組態、編址和編程).
組合式配置： SIMATIC S5和SIMATIC S7可以作為PROFIBUS主站符合EN 50 170規范。

CPU 414-3 和 CPU 414-3 PN/DP 還包括：

附加模塊插槽：
可用IF 964-DP 接口子模板進行連接到PROFIBUS DP主站系統中。

CPU 414-3 PN/DP 另外包括：

PROFINET 接口，帶 2 個端口（*換機）：
- PROFINET I/O，可連接 256 個 IO 設備
- PROFINET CBA

功能

塊保護：
用戶程序使用密碼保護，可防止非法訪問。
集成的 HMI 服務：
用戶只能用HMI設備數據源地址和數據目標地址，此后系統將自動地進行數據傳輸。
集成的通訊功能:
- PG/OP 通訊
- 共享數據通訊
- S7 標準通訊
- S7 通訊

CPU 414-3 PN/DP 其它：

在TCP/IP、UDP和ISO-on-TCP (RFC1006)上實現開放的通訊
在基于組件的自動化 (CBA) 中實現分布式智能系統 (PROFINET)
通過集成的 Web 服務器而獲得附加診斷功能
通過網絡進行固件更新

可以參數化的屬性

可使用 STEP 7 工具“Hardware Configuration”對 S7-400（包括 CPU）的性能和響應進行編程，如：

MPI多點接口：
- 站地址定義
- 啟動/循環行為
- zui大循環時間和通訊負荷的規定
地址分配：
I/O 模塊的編址
保持范圍：
定義保持性位存儲器、計數器、定時器和時鐘存儲器。
過程映像、局部數據的大小
診斷緩存區的長度
保護級：
程序和數據訪問*的定義
系統診斷：
確定診斷信息的處理方法和范圍
實時中斷:
設定周期

CPU 414-3 PN/DP 其它：

PROFINET Interface
使用 NTP 規程對時間同步進行參數化

信息指示功能

狀態和錯誤指示燈：
通過 LED 指示出內部和外部錯誤及運行狀態，如運行 (RUN)、停止 (STOP)、重新啟動 (Restart)、測試功能 (Test function) 等。
測試功能：
可使用編程設備顯示程序執行中的信號狀態，不考慮用戶程序而修改過程變量，讀取堆棧存儲器的內容，運行單獨程序步驟，并禁用程序組件。
信息功能：
可使用編程設備為用戶提供有關存儲器容量和 CPU 的工作模式，以及工作和負載存儲器的當前使用率等方面的信息。

技術規范

Article number	6ES7414-2XL07-0AB0	6ES7414-3XM07-0AB0	6ES7414-3EM07-0AB0
	CPU414-2, MPI/DP, 2 MB	CPU414-3, 4 MB, 3 INTERFACES	CPU414-3 PN/DP, 4 MB, 3 INTERFACES
General information
Product type designation	CPU 414-2	CPU 414-3	CPU 414-3 PN/DP
Hardware product version	01	01	01
Firmware version	V7.0	V7.0	V7.0
Engineering with
● Programming package	STEP 7 V5.4 or higher with HSP 261	STEP 7 V5.4 or higher with HSP 261	STEP 7 V5.5 or higher with HSP 262
CiR – Configuration in RUN
CiR synchronization time, basic load	100 ms	100 ms	100 ms
CiR synchronization time, time per I/O byte	15 µs	15 µs	15 µs
Supply voltage
Rated value (DC)
● 24 V DC	No; Power supply via system power supply	No; Power supply via system power supply	No; Power supply via system power supply
Input current
from backplane bus 5 V DC, typ.	0.9 A	1.1 A	1.3 A
from backplane bus 5 V DC, max.	1.1 A	1.3 A	1.6 A
from backplane bus 24 V DC, max.	300 mA; 150 mA per DP interface	450 mA; 150 mA per DP interface	300 mA; 150 mA per DP interface
from interface 5 V DC, max.	90 mA; At each DP interface	90 mA; At each DP interface	90 mA; At each DP interface
Power loss
Power loss, typ.	4.5 W	5.5 W	6.5 W
Power loss, max.	5.5 W	6.5 W	8 W
Memory
Type of memory	RAM	RAM	RAM
Work memory
● integrated	2 Mbyte	4 Mbyte	4 Mbyte
● integrated (for program)	1 Mbyte	2 Mbyte	2 Mbyte
● integrated (for data)	1 Mbyte	2 Mbyte	2 Mbyte
● expandable	No	No	No
Load memory
● expandable FEPROM	Yes; with Memory Card (FLASH)	Yes; with Memory Card (FLASH)	Yes; with Memory Card (FLASH)
● expandable FEPROM, max.	64 Mbyte	64 Mbyte	64 Mbyte
● integrated RAM, max.	512 kbyte	512 kbyte	512 kbyte
● expandable RAM	Yes; with Memory Card (RAM)	Yes; with Memory Card (RAM)	Yes; with Memory Card (RAM)
● expandable RAM, max.	64 Mbyte	64 Mbyte	64 Mbyte
Backup
● present	Yes	Yes	Yes
● with battery	Yes; all data	Yes; all data	Yes; all data
● without battery	No	No	No
Battery
Backup battery
● Backup current, typ.	180 µA; up to 40 °C	180 µA	180 µA; up to 40 °C
● Backup current, max.	850 µA	850 µA	850 µA
● Backup time, max.	Dealt with in the module data manual with the secondary conditions and the factors of influence	Dealt with in the module data manual with the secondary conditions and the factors of influence	Dealt with in the module data manual with the secondary conditions and the factors of influence
● Feeding of external backup voltage to CPU	5 V DC to 15 V DC	5 V DC to 15 V DC	5 V DC to 15 V DC
CPU processing times
for bit operations, typ.	18.75 ns	18.75 ns	18.75 ns
for word operations, typ.	18.75 ns	18.75 ns	18.75 ns
for fixed point arithmetic, typ.	18.75 ns	18.75 ns	18.75 ns
for floating point arithmetic, typ.	37.5 ns	37.5 ns	37.5 ns
CPU-blocks
DB
● Number, max.	6 000; Number range: 1 to 16000	6 000; Number range: 1 to 16000	6 000; Number range: 1 to 16000
● Size, max.	64 kbyte	64 kbyte	64 kbyte
FB
● Number, max.	3 000; Number range: 0 to 7999	3 000; Number range: 0 to 7999	3 000; Number range: 0 to 7999
● Size, max.	64 kbyte	64 kbyte	64 kbyte
FC
● Number, max.	3 000; Number range: 0 to 7999	3 000; Number range: 0 to 7999	3 000; Number range: 0 to 7999
● Size, max.	64 kbyte	64 kbyte	64 kbyte
OB
● Number, max.	see instruction list	see instruction list	see instruction list
● Size, max.	64 kbyte	64 kbyte	64 kbyte
● Number of free cycle OBs	1; OB 1	1; OB 1	1; OB 1
● Number of time alarm OBs	4; OB 10-13	4; OB 10-13	4; OB 10-13
● Number of delay alarm OBs	4; OB 20-23	4; OB 20-23	4; OB 20-23
● Number of cyclic interrupt OBs	4; OB 32-35 (shortest cycle that can be set = 500 µs)	4; OB 32-35 (shortest cycle that can be set = 500 µs)	4; OB 32, 33, 34, 35 (shortest cycle that can be set = 500 µs)
● Number of process alarm OBs	4; OB 40-43	4; OB 40-43	4; OB 40-43
● Number of DPV1 alarm OBs	3; OB 55-57	3; OB 55-57	3; OB 55-57
● Number of isochronous mode OBs	3; OB 61-63	3; OB 61-63	3; OB 61-63
● Number of multicomputing OBs	1; OB 60	1; OB 60	1; OB 60
● Number of background OBs	1; OB 90	1; OB 90	1; OB 90
● Number of startup OBs	3; OB 100-102	3; OB 100-102	3; OB 100-102
● Number of asynchronous error OBs	9; OB 80-88	9; OB 80-88	9; OB 80-88
● Number of synchronous error OBs	2; OB 121, 122	2; OB 121, 122	2; OB 121, 122
Nesting depth
● per priority class	24	24	24
● additional within an error OB	1	1	1
Counters, timers and their retentivity
S7 counter
● Number	2 048	2 048	2 048
Retentivity
— adjustable	Yes	Yes	Yes
— lower limit	0	0	0
— upper limit	2 047	2 047	2 047
— preset	Z 0 to Z 7	Z 0 to Z 7	Z 0 to Z 7
Counting range
— lower limit	0	0	0
— upper limit	999	999	999
IEC counter
● Number	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)
S7 times
● Number	2 048	2 048	2 048
Retentivity
— adjustable	Yes	Yes	Yes
— lower limit	0	0	0
— upper limit	2 047	2 047	2 047
— preset	No times retentive	No times retentive	No times retentive
Time range
— lower limit	10 ms	10 ms	10 ms
— upper limit	9 990 s	9 990 s	9 990 s
IEC timer
● present	Yes	Yes	Yes
● Type	SFB	SFB	SFB
● Number	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)	Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total	Total working and load memory (with backup battery)	Total working and load memory (with backup battery)	Total working and load memory (with backup battery)
Flag
● Number, max.	8 kbyte; Size of bit memory address area	8 kbyte; Size of bit memory address area	8 kbyte; Size of bit memory address area
● Retentivity available	Yes	Yes	Yes
● Retentivity preset	MB 0 to MB 15	MB 0 to MB 15	MB 0 to MB 15
● Number of clock memories	8; in 1 memory byte	8; in 1 memory byte	8; in 1 memory byte
Data blocks
● Number, max.	6 000; Number range: 1 to 16000	6 000; Number range: 1 to 16000	6 000; Number range: 1 to 16000
● Size, max.	64 kbyte	64 kbyte	64 kbyte
Local data
● adjustable, max.	16 kbyte	16 kbyte	16 kbyte
● preset	8 kbyte	8 kbyte	8 kbyte
Address area
I/O address area
● Inputs	8 kbyte	8 kbyte	8 kbyte
● Outputs	8 kbyte	8 kbyte	8 kbyte
of which distributed
— MPI/DP interface, inputs	2 kbyte	2 kbyte	2 kbyte
— MPI/DP interface, outputs	2 kbyte	2 kbyte	2 kbyte
— DP interface, inputs	6 kbyte	6 kbyte	6 kbyte
— DP interface, outputs	6 kbyte	6 kbyte	6 kbyte
— PROFINET interface, inputs			8 kbyte
— PROFINET interface, outputs			8 kbyte
Process image
● Inputs, adjustable	8 kbyte	8 kbyte	8 kbyte
● Outputs, adjustable	8 kbyte	8 kbyte	8 kbyte
● Inputs, default	256 byte	256 byte	256 byte
● Outputs, default	256 byte	256 byte	256 byte
● consistent data, max.	244 byte	244 byte	244 byte
● Access to consistent data in process image	Yes	Yes	Yes
Subprocess images
● Number of subprocess images, max.	15	15	15
Digital channels
● Inputs	65 536	65 536	65 536
— of which central	65 536	65 536	65 536
● Outputs	65 536	65 536	65 536
— of which central	65 536	65 536	65 536
Analog channels
● Inputs	4 096	4 096	4 096
— of which central	4 096	4 096	4 096
● Outputs	4 096	4 096	4 096
— of which central	4 096	4 096	4 096
Hardware configuration
Number of expansion units, max.	21	21	21
connectable OPs	63	63	63
Multicomputing	Yes; 4 CPUs max. (with UR1 or UR2)	Yes; 4 CPUs max. (with UR1 or UR2)	Yes; 4 CPUs max. (with UR1 or UR2)
Interface modules
● Number of connectable IMs (total), max.	6	6	6
● Number of connectable IM 460s, max.	6	6	6
● Number of connectable IM 463s, max.	4; IM 463-2	4; IM 463-2	4; IM 463-2
Number of DP masters
● integrated	2	2	1
● via CP	10; CP 443-5 Extended	10; CP 443-5 Extended	10; CP 443-5 Extended
● via IM 467	4	4	4
● Mixed mode IM + CP permitted	No; IM 467 cannot be used jointly with CP 443-5 Ext. or CP 443-1 in PROFINET IO mode	No; IM 467 cannot be used jointly with CP 443-5 Ext. or CP 443-1 in PROFINET IO mode	No; IM 467 cannot be used jointly with CP 443-5 Ext. or CP 443-1 in PROFINET IO mode
● via interface module	0	1	1; IF 964-DP
● Number of pluggable S5 modules (via adapter capsule in central device), max.	6	6	6
Number of IO Controllers
● integrated	0	0	1
● via CP	4; Max. 4 in the central controller; no mixed operation of different CP 443-1 types in PROFINET IO mode	4; Max. 4 in the central controller; no mixed operation of different CP 443-1 types in PROFINET IO mode	4; Max. 4 in the central controller; no mixed operation of different CP 443-1 types in PROFINET IO mode
Number of operable FMs and CPs (recommended)
● FM	Limited by number of slots and number of connections	Limited by number of slots and number of connections	Limited by number of slots and number of connections
● CP, PtP	CP 440: Limited by number of slots; CP 441: limited by number of connections	CP 440: Limited by number of slots; CP 441: limited by number of connections	CP 440: Limited by number of slots; CP 441: Limited by number of slots and number of connections
● PROFIBUS and Ethernet CPs	14; In total max. 10 CPs as DP master and PROFINET controller, of which up to 10 IMs or CPs as DP master and up to 4 CPs as PROFINET controller	14; In total max. 10 CPs as DP master and PROFINET controller, of which up to 10 IMs or CPs as DP master and up to 4 CPs as PROFINET controller	14; In total max. 10 CPs as DP master and PROFINET controller, of which up to 10 IMs or CPs as DP master and up to 4 CPs as PROFINET controller
Slots
● required slots	1	2	2
Time of day
Clock
● Hardware clock (real-time)	Yes	Yes	Yes
● retentive and synchronizable	Yes	Yes	Yes
● Resolution	1 ms	1 ms	1 ms
● Deviation per day (buffered), max.	1.7 s; Power off	1.7 s; Power off	1.7 s; Power off
● Deviation per day (unbuffered), max.	8.6 s; For power On	8.6 s; For power On	8.6 s; For power On
Operating hours counter
● Number	16	16	16
● Number/Number range	0 to 15	0 to 15	0 to 15
● Range of values	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours
● Granularity	1 hour	1 hour	1 hour
● retentive	Yes	Yes	Yes
Clock synchronization
● supported	Yes	Yes	Yes
● to MPI, master	Yes	Yes	Yes
● to MPI, slave	Yes	Yes	Yes
● to DP, master	Yes	Yes	Yes
● to DP, slave	Yes	Yes	Yes
● in AS, master	Yes	Yes	Yes
● in AS, slave	Yes	Yes	Yes
● on Ethernet via NTP	No; Via CP	No; Via CP	Yes; As client
● to IF 964 DP	No	Yes	Yes
Time difference in system when synchronizing via
● Ethernet, max.			10 ms
● MPI, max.	200 ms	200 ms	200 ms
Interfaces
Interfaces/bus type	1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP	1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP, 1 x PROFIBUS DP (optionally pluggable)	1 x MPI/PROFIBUS DP, 1 x PROFINET (2 ports), 1 x PROFIBUS DP (optionally pluggable)
Number of RS 485 interfaces	2; Combined MPI / PROFIBUS DP and PROFIBUS DP	2; Combined MPI / PROFIBUS DP and PROFIBUS DP	1; Combined MPI / PROFIBUS DP
Number of other interfaces		1; PROFIBUS DP with IF 964-DP (plug-in option; MLFB: 6ES7964-2AA04-0AB0)	1; PROFIBUS DP with IF 964-DP (plug-in option; MLFB: 6ES7964-2AA04-0AB0)
1. Interface
Interface type	Integrated	Integrated	Integrated
Physics	RS 485 / PROFIBUS + MPI	RS 485 / PROFIBUS + MPI	RS 485 / PROFIBUS + MPI
Isolated	Yes	Yes	Yes
Power supply to interface (15 to 30 V DC), max.	150 mA	150 mA	150 mA
Number of connection resources	MPI: 32, DP: 16	MPI: 32, DP: 16	MPI: 32, DP: 16
Functionality
● MPI	Yes	Yes	Yes
● PROFIBUS DP master	Yes	Yes	Yes
● PROFIBUS DP slave	Yes	Yes	Yes
MPI
● Number of connections	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
● Transmission rate, max.	12 Mbit/s	12 Mbit/s	12 Mbit/s
Services
— PG/OP communication	Yes	Yes	Yes
— Routing	Yes	Yes	Yes
— Global data communication	Yes	Yes	Yes
— S7 basic communication	Yes	Yes	Yes
— S7 communication	Yes	Yes	Yes
— S7 communication, as client	Yes	Yes	Yes
— S7 communication, as server	Yes	Yes	Yes
DP master
● Number of connections, max.	16; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	16; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1	16; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
● Transmission rate, max.	12 Mbit/s	12 Mbit/s	12 Mbit/s
● Number of DP slaves, max.	32	32	32
Services
— PG/OP communication	Yes	Yes	Yes
— Routing	Yes; S7 routing	Yes; S7 routing	Yes; S7 routing
— Global data communication	No	No	No
— S7 basic communication	Yes	Yes	Yes
— S7 communication	Yes	Yes	Yes
— S7 communication, as client	Yes	Yes	Yes
— S7 communication, as server	Yes	Yes	Yes
— Equidistance	Yes	Yes	Yes
— Isochronous mode	Yes	Yes	Yes
— SYNC/FREEZE	Yes	Yes	Yes
— Activation/deactivation of DP slaves	Yes	Yes	Yes
— Direct data exchange (slave-to-slave communication)	Yes	Yes	Yes
— DPV1	Yes	Yes	Yes
Address area
— Inputs, max.	2 kbyte	2 kbyte	2 kbyte
— Outputs, max.	2 kbyte	2 kbyte	2 kbyte
User data per DP slave
— User data per DP slave, max.	244 byte	244 byte	244 byte
— Inputs, max.	244 byte	244 byte	244 byte
— Outputs, max.	244 byte	244 byte	244 byte
— Slots, max.	244	244	244
— per slot, max.	128 byte	128 byte	128 byte
DP slave
● Number of connections	16	16	16
● GSD file	http://support.automation.siemens.com/WW/view/en/113652	http://support.automation.siemens.com/WW/view/en/113652	http://support.automation.siemens.com/WW/view/en/113652
● Transmission rate, max.	12 Mbit/s	12 Mbit/s	12 Mbit/s
● automatic baud rate search	No	No	No
● Address area, max.	32; Virtual slots	32; Virtual slots	32; Virtual slots
● User data per address area, max.	32 byte	32 byte	32 byte
— of which consistent, max.	32 byte	32 byte	32 byte
Services
— PG/OP communication	Yes; with interface active	Yes; with interface active	Yes; with interface active
— S7 routing	Yes; with interface active	Yes; with interface active	Yes; with interface active
— Global data communication	No	No	No
— S7 basic communication	No	No	No
— S7 communication	Yes	Yes	Yes
— S7 communication, as client	Yes	Yes	Yes
— S7 communication, as server	Yes	Yes	Yes
— Direct data exchange (slave-to-slave communication)	No	No	No
— DPV1	No	No	No
Transfer memory
— Inputs	244 byte	244 byte	244 byte
— Outputs	244 byte	244 byte	244 byte