進口卡套式氣源球閥
德國托普進口卡套式氣源球閥工作原理：
進口卡套式氣源球閥適用于中、小口徑管路的各種壓力、溫度和介質下控制接通或截斷管路介質的啟閉裝置;靠介質壓力將球體壓緊在出口端閥座上,其使用壓力和通徑受到一定限制.采用90°傳動,故開關方便迅速,可以實行快速啟閉。
1、通過螺紋機械式推進，卡套螺母向前運動推動后卡套向前，同時后卡套推動前卡套向前運動。
2、球閥通道平整光滑便于管道掃線清洗,可以輸送漿液及固體顆粒等介質.
3、采用PTFE(特氟隆)等材料作為密封,具有良好潤滑性和彈性,與球體摩擦系小,使用壽命長.
4、啟閉迅速,啟閉時只需把球體轉動90°,方便而迅速.
5、球閥的流體阻力小,全開時球體通道、閥體通道和連接管道的截面積相等,并且成直線想通,介質流過球閥,相當于流過一段直通的管子,在各類閥門中球閥的流體阻力zui小。
6、卡套式球閥廣泛應用于水處理設備、化工設備、石化設備、石油設備、造紙設備、采礦設備等等，進，卡套螺母向前運動推動后卡套向前，同時后卡套推動前卡套向前運動。
Germany top import card type gas valve working principle:
Import card type gas ball valve is suitable for medium and small caliber pipeline pressure, temperature and medium under the control of connect or disconnect the line media on-off device; by medium pressure the ball tightly in the outlet end of the valve seat, the pressure and the diameter is restricted. By 90 degrees of transmission, so the switch is convenient and rapid that can be quickly opened and closed.
1, through the screw mechanical propulsion, the card sleeve nut forward movement to push the card sleeve forward, while the back of the card sleeve push forward the front cover.
2, the ball valve channel smooth smooth pipeline cleaning, can transport slurry and solid particles and other media
3, using PTFE (Teflon) materials such as sealing, with good lubrication and elasticity, and the ball friction coefficient of small, long service life.
4, open and close quickly, open and close the ball just turn 90 degrees, convenient and fast
5, ball valve fluid resistance small, open channel, ball valve body passage and the sectional area of the connection pipe is equal, and straight through, medium flow through the valve, the equivalent of a straight through pipe, valve in various types of valves in the fluid of least resistance.
6, sleeve type ball valve is widely used in water treatment equipment, chemical equipment, petrochemical equipment, oil equipment, papermaking equipment, mining equipment, etc., the card sets the forward movement of the rear ferrule nut push forward at the same time, after the card set to push the front sleeve forward movement.
進口卡套式氣源球閥特點：
1、用于流路的開通-截斷 2、球閥無調節能力，如果系統需要實現流量調節，必須串聯調節閥來完成
3、二通球閥的工作壓力可達20.6MPa 4、二通球閥的標準形式是水平閥，也可選用角式閥
5、使用介質為氧氣時，需采用脫脂處理 6、可面板安裝
For the flow of the road - Cut 2, ball valve without the ability to adjust, if the system needs to achieve flow control, the valve must be completed in series
3, the two way ball valve working pressure up to 20.6MPa 4, the standard form of the two way valve is horizontal valve, angle valve can also be used
5, the use of media for oxygen, the need to use degreasing treatment 6, panel installation
進口卡套式氣源球閥技術參數：
閥體材料：304、316 閥門口徑：DN3-20 閥門壓力：1000WOG
連接標準：ASME B16.10、DIN2501 控制方式：手動 密封材料：PTFE、
工作溫度：-20℃至+150℃
進口卡套式氣源球閥應用領域：
藥品、食品、化妝品
Application of imported card sleeve air source ball valve:
Medicine, food, cosmetics
