產品標題: 本特利 128275-01F 擴展填充板 用TSI汽輪機

型號： 128275-01F

品牌： 本特利

詳情資料

本特利bently3300XL8mm傳感器系統用于機械的軸振動、軸位移、鍵相位和轉速測量。廣泛應用于發電廠、煉油廠、化工廠、鋼鐵廠、水泵廠、風機廠等行業企業。本特利（BentlyNevada）振動傳感器用于檢測汽輪機、水輪機、鼓風機、壓縮機、空分機、齒輪箱、水泵等大型旋轉機械軸的振動在線測量和保護。 
本特利bently3300XL8mm電渦流傳感器系統包括：探頭、延伸電纜、前置器
系統長度：5或9米（包括延長電纜）或1米（僅探頭）。
電源：無柵時要求-17.5Vdc至-26Vdc，電流***大為12mA，
線性范圍：2mm
推薦的間隙設定值：1.27mm
靈敏度（ISF）：7.87V/mm(200mV/mil)
頻率響應：0-10kHz：從3300XL前置器到監測器的***大長度為305米現場聯線。
軸直徑推薦***小：76.2mm(3in)
探頭工作溫度：標準探頭-52°C至+177°C；高溫探頭-52°C至+218°C
延長電纜溫度：標準電纜-52°C至+177°C；高溫電纜-52°C至+260°C
前置器工作溫度：-52°C至+100°C
線性范圍、精度和溫度穩定性。
所有3300XL8mm接近傳感器系統都提供了這一性能水平，并支持探頭、延長電纜和位移檢測器傳感器的互換性，無需匹配或臺架校準單個部件。

英文資料

The Bently 3300XL8mm sensor system is used for measuring shaft vibration, shaft displacement, keyphase, and rotational speed in machinery. Widely used in industries such as power plants, refineries, chemical plants, steel plants, water pump plants, and fan factories. Bently Nevada vibration sensors are used for online vibration measurement and protection of large rotating machinery shafts such as steam turbines, water turbines, blowers, compressors, air separators, gearboxes, and water pumps.

Bently 3300XL8mm eddy current sensor system includes: probe, extension cable, and proximitor

System length: 5 or 9 meters (including extension cable) or 1 meter (probe only).

Power supply: When there is no safety barrier, it is required to operate from -17.5Vdc to -26Vdc, with a current of up to 12mA,

Linear range: 2mm

Recommended clearance setting value: 1.27mm

Sensitivity (ISF): 7.87V/mm (200mV/mil)

Frequency response: 0-10kHz: 305 meters of field wiring from the 3300XL Proximitor to the Monitor.

Recommended shaft diameter * * * Small: 76.2mm (3in)

Probe operating temperature: standard probe -52 ° C to+177 ° C; High temperature probe -52 ° C to+218 ° C

Extension cable temperature: standard cable -52 ° C to+177 ° C; High temperature cable -52 ° C to+260 ° C

Proximitor operating temperature: -52 ° C to+100 ° C

Linear range, accuracy, and temperature stability.

All 3300XL8mm proximity sensor systems provide this level of performance and support complete interchangeability of probes, extension cables, and displacement detector sensors without the need for matching or bench calibration of individual components.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。