通信電纜 網絡設備 無線通信 云計算|大數據 顯示設備 存儲設備 網絡輔助設備 信號傳輸處理 多媒體設備 廣播系統 智慧城市管理系統 其它智慧基建產品
昆山熙日機械設備有限公司
昆山熙日機械設備有限公司
thyrcont圖拉特真空計VSI19DVSI19DVacuumTransducer●DN40CFThedigitalcoldcathodetransducerVSImeasuresabsolutepressureinthehighvacuumrange
thyrcont圖拉特真空計VSI19D
The digital cold cathode transducer VSI measures absolute pressure in the high vacuum range.
Its microcontroller intelligence allows for individual adjustment of sensor parameters to the application.
描述
Cathode sensor is controlled either automatically or manually by the user
Fast ignition due to a special technology
Insensitive against inrush of air due to automatic switch-off
Connector for protection class IP54 available
Easily replaceable sensor heads with stored calibration data
Digital and analog output signal / interfaces: 2.199 – 7.801 Volt, RS485
Output signal scalable according to required output characteristics for an easy replacement of existing transducers
應用
Coating plants and vapor deposition
Industrial furnaces
Process engineering
Analytical instruments
Sputtering plants
Measuring and controlling in high vacuum
技術參數
| WEIGHT | 0.555 kg |
|---|---|
| DIMENSIONS | 6.9 x 4.8 x 15.3 cm |
| MEASURING PRINCIPLE | Cold cathode ionization sensor (inverted magnetron), depending on gas type |
| MATERIALS IN CONTACT WITH VACUUM | Stainl. steel 1.4307, nickel, tungsten, molybdenum, glass, ceramic |
| MEASUREMENT RANGE | 2e-3 – 5e-9 mbar (Torr), max. overpressure 10 bar abs. |
| ACCURACY | 2e-3 mbar – 2e-8 mbar: < 25% from reading |
| REPEATABILITY | 2e-3 – 2e-8 mbar: Approx. ±7% from reading |
| CATHODE VOLTAGE | Max. 2,5 kV |
| POWER SUPPLY | 20 – 30 VDC |
| ELECTRICAL CONNECTION | D-Sub, 15-pin, male; optional: FCC68 (P_VSI003) |
| POWER CONSUMPTION | Max. 3 W, additionally 0.8 W f. EtherCAT / relays / LCD |
| OPERATING TEMPERATURE | +5…+60°C |
| STORAGE TEMPERATURE | -40…+65°C |
| MAX. BAKE OUT TEMPERATURE | 160°C at flange (electronic detached) |
| OUTPUT SIGNAL | 0 – 10 VDC, measuring range 1.819 – 8.6 VDC, log., 0.6 V/decade configurable; resistor > 10kOhm |
| SERIAL INTERFACE | RS485: 9.6 kBd to 115 kBd, address switch 1 – 16 |
| SWITCH POINT | 2 switch-over relays, 50 VAC / 2 A, 30 VDC / 2 A, max. 60 VA |
| VACUUM CONNECTION | DN 40 CF-F |
| PROTECTION CLASS | IP40, IP54 only with counter plug – see accessories |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智慧城市網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
