產品用途Purpose:
電池針刺試驗機通過針刺試驗檢驗電池的安全性能，通過實時試驗數據(如電池電壓、電池表面溫度、壓力視頻數據進行實驗結果判定)針刺試驗結束后電池應不起火，不爆炸、不冒煙;也是各電池廠家及研究所的檢測設備。
產品特點 Product Feature
Qc743老標準要求:
用直徑@3mm~8mm的耐高溫鋼針、以IOmm/s~40mmls的速度，從垂直于蓄電池模塊極板的方向貫穿至少三個蓄電池單體(鋼針停留在蓄電池中)
QC743新標準要求:
用6mm-o10mm的耐高溫鋼針(針尖的角度為60度，針的表面光潔、無銹蝕、氧化層及油污)、以20~30mm/s的速度，從垂直于蓄電池極板的方向，直至貫穿3個單體蓄電池(鋼針停留在蓄電池中。試驗后觀察1h)
QC743 Old Standard Requirement:
With diameter o3mm-8mm high temperatureresistant steel needle, lOmmls~40mms speed, penetrate at least three storage battery monomer from vertical direction of store battery module pole board(steel needle stay in the storage battery)
QC743 New Standard Requirement:
With diameter 6mm-o10mm high temperature resistant steel needle(the angle of needle point is 60 degree, needle surface firish, no corrosion,oxidelayer and oilstin).20mmls-3Ommls speed,from vertical direoction of store battery module pole board, penetrate till hree monomer storage battery(steel needle stay in the storage battery, observe 1h after test)
標準依據 Standard Basis
GB/T 18332.2-2001電動道路車輛用金屬氫化物鎳蓄電池
QC/T 743電動汽車用鋰離子蓄電池
QC/T 744電動汽車用金屬氫化物鎳蓄電池 汽車動力電池的相關標準國際標準(ISOIIECISAE/JEVA/CEN等)、國際標準協會及"863計劃"電動汽車重大專項相關測試規范
QB/T2947.3-2008電動自行車用蓄電池及充電器第3部分
DBI2/T246-2005電動自行車鋰電池測試標準
GB 19521.11-2005鋰電池組危險貨物危險特性檢驗安全規范
GB/T31485-2015電動汽車用動力蓄電池安全要求及試驗方法
GB/T31486-2015電動汽車用動力蓄電池電性能要求及試驗方法
GB/T31467.3-2015電動汽車用鋰離子動力蓄電池包和系統測試規程
GB/T 18332.2-2001 Nickle metal hydride storage battery for electric road vehicle
QC/T743 Lithium ion storage battery for electric vehicle
QC/T744Vehicle power batlery revelant international standards of nickle metal hydride storage battery for electric vehicle(SOVIECISAEUJEVACENetc).international standard association and "863 plan" electric vehicle major specific revelant test specification
QB/T2947.3-2008 Part 3 storage and charger for electric bicycle
DB12/T246-2005 Electric vehicle lithium battery test standard
GB 19521.11-2005Lithium battery pack dangerous goods dangerous property inspection safety specification
GB/T31485-2015 Power storage battery safety requirement and test method for electric vehicle
GB/T31486-2015 Power storage battery safety requirement and test method for electric vehicle
GB/T31467.3-2015Lithium ion power storage battery pack and system test procedure for electric vehicle
產品規格Product specifications
| 設備型號Equipment model | 測試空間Test space(mm) | 設備外形尺寸Machine External Dimension |
| RL-DZC-2T | 200×200x200 | W750xD650xH1800mm |
| RL-DZC-5T | 600x600x600 | W1000xD900xH2200mm |
| RL-DZC-9002D | 800x800×800 | W3000xD1200xH1300mm |
| RL-DzC-9002T | 1000x1000x1000 | W3300xD150OxH1500mm |
| 輔助功能 Accessibility Function | 電壓、溫度采集、視頻監控系統、滅火系統、安全防爆系統、煙霧排放系統、煙霧過濾系統 Voltage,Temperature acquisition,Camera monitoring system,Sprinkler system, Safety explosion proof system,Smog emission system, Smog filter system |
| 針刺速度Nail Penetrating Speed | 0~80mm/min（可調），可按要求定制到200mm/min 0~80mm/min (Adjustable )，Can customize to 200mm/min according to requirement |
| 測試空間(mm)Test Space | 200x200x200mm、500x500x500mm、800x800x800mm、1000x1000x1000mm(可按要求定制) Can customize according to requirement |
| 外形尺寸External Dimension | 依實際設計為準Subject to actual design |
| 選 配 指 標 |
|
| 主 要 技 術 指 標 |
|
| 結 構 |
|
| 標準配置 Standard Configuration | 針刺主機1套,控制柜1套，直徑v3mm~u8mm耐高溫鋼針1套Nail penetrating main body one set,control cabinet one set,diameter u3mm~u8mm high temperature resistant steel needle one set |
| 測試夾具Test Clamp | 特定制作，根據樣品實際使用條件而定Specific production,customize by sample actual usage condition |
| 電源電壓Power Supply | AC380V 50HZ三相五線制AC380V 50HZ three phases five wires |
| 使用環境 Usage Environment | 0°C~45°℃ |
